REGULOR LED extrusion / fixtures without cover

Manufacturer: Kluś
Availability:
£9.99

REGULOR LED extrusion / fixtures without cover – article number B468+43

Product characteristic
The extrusion made from high quality anodized aluminum is designed for flexible or rigid LED strips which with light sources are 10,8mm in width. They
are covered by a special frosted or transparent diffuser made from polycarbonate. The characteristic of the Regulor extrusion is an aluminum insert. The
insert permits to adjust angles of diode’s lighting. We can receive suitable angles of lighting by using focusing cover “S” and putting insert into the
extrusion in the proper notch. If these two conditions are fulfilled it is possible to get the following angles of lighting: 10 degree (without insert)
and 30O, 60O, 90O (depends from the insert position). Regular polypropylene end caps and mounting brackets made from zinc or chrome steel are used for
the extrusion as supplementary accessories. End caps protect the extrusion from dust and other undesirable elements, which can make LED strips dirty and
consequently deteriorate the lighting parameters. The extrusion is fixed to base by a double sided adhesive tape or a mounting bracket. The mounting
bracket guarantees easy and solid fixing to surfaces that are not perfectly flat. We can get a flat line of lighting with the application of frosted
cover HS and LED strips placed densely. There is a possibility of preparing a LED fixture with a high tightness. The ingress protection rating
(describes the protection against the ingress of solids, dust and water) equals IP 67.

Application
The extrusion with LED light source is mostly used as interior lighting, especially to light cabinets, glass-case, or as a decoration light with
different beam angles. IP 67 version can be also used as an outdoor lighting for elevations or architectural elements of gardens.

Note: All LED profiles are NOT ELIGIBLE for free delivery

Products related to the Extrusion


Technical specification
Ingress Protection Rating - IP 20 (standard), IP 67 (optional)
Dimensions - 12 mm (18mm with cover S) x 16 mm x 100/200/300 mm
Material - body – aluminium, cover – polycarbonate (PC), end cap – polypropylene (PP)
Product complies with RoHS directive

PRICED PER AND 1 METER (3.2808399 feet)
Note: All LED profiles are NOT ELIGIBLE for free delivery